1. |
|
Drill hole to the diameter and depth as specified. |
|
 |
2. |
|
Tap the thread to the correct depth & fit classification as specified, using the correct STI taps. |
|
 |
3. |
|
Gauge the tapped hole using a Go / No-Go wire insert thread plug gauge. |
|
 |
4. |
|
Install the insert to the desired depth using the correct inserting tools. |
|
 |
5. |
|
After installation remove the driving tang from the insert using the correct size tang break punch. A sharp hammer blow will shear the tang at the break off notch with out moving the insert. |
|
 |
6. |
|
Gauge the fitted insert using a standard Go / No-Go thread plug gauge. |
|
 |